NoxPlayerを使い、 DPF Monitor for Fiat & Alfa Romeo をPCでプレイ
アプリ紹介
Control your diesel engine condition by monitoring DPF diesel particulate filter clog level and regenerations history. Easily check if the filter is currently in the regeneration process.
In modern diesel engines any car faults are impacting DPF filter condition. Faulty injectors, cylinder compression issues, blow-by circuit problems, engine seals worn and many others.
Controlling DPF state gives the best overview of the car condition and performance. It is great tool when you are buying used car, you can instantly check car engine state and confirm car mileage.
To use this application you need elm327 bluetooth diagnostic interface and connect it to the OBD connector in your car.
To read DPF data, the program must connect to the engine via the CAN bus, so please make sure that the interface supports the ISO 14230-4 KPW protocol (fast init, 10.4Kbaud).
Readings available:
- Current dpf status and clog level
- Current dpf temperature
- Current engine temperature
- Current differential pressure - another way to see dpf filter clogging
- Regeneration progress
- Distance from last DPF regeneration
- Average distance for last 5 regenerations stored in car engine control unit - ecu
- Average duration of last 5 regenerations stored in ecu
- Average temperature of last 5 regenerations stored in ecu
- Regenerations interrupted by key OFF (on some cars)
- Mileage at last oil change
- Distance from last oil change
- Engine oil degradation level
The application supports the following cars:
Alfa Romeo
- 159/Brera/Spider 1.9 2.4 2.0
- Giulietta 1.6 2.0
- Giulia 2.2
- Stelvio 2.2
Fiat
- 500 1.3 1.6
- 500L 1.3 1.6
- 500X 1.6 2.0
- Panda 1.3
- Bravo 1.6 1.9 2.0
- Croma 1.9 2.4
- Doblo 1.9
- Ducato 2.3
- Ducato 3.0
- Idea 1.6
- Linea 1.6
- Sedici 1.9 2.0
- Stilo 1.9
- Bravo 2014 1.6
- Ducato 2.3
- Egea 1.6
- Fiorino 1.3
- Punto 1.3
- Grande Punto 1.3 1.6
- Idea 1.3
- Qubo 1.3
- Strada 1.3
- Tipo 1.6
- Toro 2.0
- Freemont 2.0
Lancia
- Delta 1.6 1.9 2.0
- Musa 1.6
- Thesis 2.4
- Delta 2014 1.6 2.0,
- Ypsilon 1.3,
Chrysler
- Delta 1.6 2.0
- Ypsilon 1.3,
Dodge Neon 1.3 1.6,
Jeep Renegade 1.6 2.0,
Suzuki SX4 1.9 DDiS
Saab 9-3 II 1.9 TiD
We did our best to ensure that this application is safe and not interfere with your car electronics, but still you are using it at your own risk. We recommend not to use it while driving. Authors are not responsible for any injuries made to you or any damage made to your car.
In modern diesel engines any car faults are impacting DPF filter condition. Faulty injectors, cylinder compression issues, blow-by circuit problems, engine seals worn and many others.
Controlling DPF state gives the best overview of the car condition and performance. It is great tool when you are buying used car, you can instantly check car engine state and confirm car mileage.
To use this application you need elm327 bluetooth diagnostic interface and connect it to the OBD connector in your car.
To read DPF data, the program must connect to the engine via the CAN bus, so please make sure that the interface supports the ISO 14230-4 KPW protocol (fast init, 10.4Kbaud).
Readings available:
- Current dpf status and clog level
- Current dpf temperature
- Current engine temperature
- Current differential pressure - another way to see dpf filter clogging
- Regeneration progress
- Distance from last DPF regeneration
- Average distance for last 5 regenerations stored in car engine control unit - ecu
- Average duration of last 5 regenerations stored in ecu
- Average temperature of last 5 regenerations stored in ecu
- Regenerations interrupted by key OFF (on some cars)
- Mileage at last oil change
- Distance from last oil change
- Engine oil degradation level
The application supports the following cars:
Alfa Romeo
- 159/Brera/Spider 1.9 2.4 2.0
- Giulietta 1.6 2.0
- Giulia 2.2
- Stelvio 2.2
Fiat
- 500 1.3 1.6
- 500L 1.3 1.6
- 500X 1.6 2.0
- Panda 1.3
- Bravo 1.6 1.9 2.0
- Croma 1.9 2.4
- Doblo 1.9
- Ducato 2.3
- Ducato 3.0
- Idea 1.6
- Linea 1.6
- Sedici 1.9 2.0
- Stilo 1.9
- Bravo 2014 1.6
- Ducato 2.3
- Egea 1.6
- Fiorino 1.3
- Punto 1.3
- Grande Punto 1.3 1.6
- Idea 1.3
- Qubo 1.3
- Strada 1.3
- Tipo 1.6
- Toro 2.0
- Freemont 2.0
Lancia
- Delta 1.6 1.9 2.0
- Musa 1.6
- Thesis 2.4
- Delta 2014 1.6 2.0,
- Ypsilon 1.3,
Chrysler
- Delta 1.6 2.0
- Ypsilon 1.3,
Dodge Neon 1.3 1.6,
Jeep Renegade 1.6 2.0,
Suzuki SX4 1.9 DDiS
Saab 9-3 II 1.9 TiD
We did our best to ensure that this application is safe and not interfere with your car electronics, but still you are using it at your own risk. We recommend not to use it while driving. Authors are not responsible for any injuries made to you or any damage made to your car.

DPF Monitor for Fiat & Alfa RomeoをPCプレイのやり方や仕組み

1お使いのPCでNoxPlayerをダウンロードします

2ダウンロードされたファイルを実行して PCにインストールします。

3NoxPlayerを起動し、検索バーに DPF Monitor for Fiat & Alfa Romeoを入力して検索します

4GoogleにサインインしてGoogle Play ストア経由で アプリをインストールします

5ホーム画面にてアプリのアイコンを クリックしてアプリを起動します。

6DPF Monitor for Fiat & Alfa RomeoをPCでダウンロードしてプレイする方法
お役立ち情報
オープンソースであるAndroidをもとにしており、NoxPlayer内アプリのダウンロードもGooglePlayから行われるのが前提となっており、 違法性がなく誰でも無料&安心して利用できます。iPhoneやAndroidスマホでもSNS連携済みのゲームアカウントを利用すれば、PCでスマホと同じデータでプレイできます! 更に、NoxPlayerがGDPR(EU一般データ保護規則)に準拠しており、個人情報やプライバシーを保護することを約束します。
DPF Monitor for Fiat & Alfa Romeoのプレイ動画
DPF Monitor for Fiat & Alfa Romeoをプレイするには、スマホの小画面ではやりづらいとでも思われるプレイヤーにNoxPlayerをご紹介します!NoxPlayerでプレイのメリットがPCの大画面だけではなく、キーボードもマウスもコントローラーも対応というところもあります!DPF Monitor for Fiat & Alfa RomeoをPCでダウンロードし、プレイすることでバッテリー消耗激しい、空き容量不足、着信などによる邪魔という心配も解消されます。Android7に対応した最新版のNoxPlayerでは、99%のスマホゲームがプレイできます。スマホアプリやスマホゲームをPCで起動させるための最強かつ一番軽いAndroidエミュレーターです。スマホ以上の操作感を実現しています。当然ながら、NoxPlayerに内蔵されているのがオープンソースの純正AndroidOSとなっており、安全性もバッチリです。
NoxPlayerのマルチプレイ機能を使うことで、多重起動そして複数ゲームの同時プレイが可能になります。独自な仮想化技術、そしてAMDやIntelとの高い互換性を備え、一番軽くて安定なプレイ体験を届いています。今すぐダウンロードしましょう!
NoxPlayerのマルチプレイ機能を使うことで、多重起動そして複数ゲームの同時プレイが可能になります。独自な仮想化技術、そしてAMDやIntelとの高い互換性を備え、一番軽くて安定なプレイ体験を届いています。今すぐダウンロードしましょう!
お気に入りのアプリをNoxPlayerで満喫しよう
NoxPlayerがWin・Mac上起動できます。PC上のブラウザからNoxPlayerをダウンロードください

